The Ghost Immobiliser
Immobilisers are an effective tool to fight vehicle theft. They stop the vehicle from starting if the does not have a key fob. They also work well to stop hotwiring and other traditional types of vehicle theft. Newer methods such as relay theft or key cloning are becoming more common.
The Ghost Immobiliser has been designed to fight these new trends and make your car undetectable. It's silent and stealthy and does not rely on radio signals, key fobs or LED indicators.
Easy to install
ghost 2 immobiliser problems is a revolutionary device that connects to the CAN data network inside your vehicle to stop key cloning and theft. It is a TASSA-approved product, and insurance companies endorse it. It is almost unnoticeable by thieves and operates silently. It uses buttons on your steering wheel and center console to generate an individual pin-code sequence you must enter before you can start your car. autowatch ghost immobiliser cost can create up to 20 different sequences to improve security. The system is simple to install and doesn't require any additional wiring or hardware.
To ensure the best possible results, it is recommended that you choose a reputable CAN-immobiliser installer who is specialized in your vehicle type. Ideally, they will have a workshop in your area that allows you to visit and have your installation completed. They will also have a variety tools and materials to assist you with the installation process. These include hand tools, a multimeter and insulation tape as well as heat shrink tubing to protect the connections. A user's manual will offer instructions specific to the wiring of your vehicle.
Connect the battery prior to beginning the installation to prevent short circuits or airbag deployment. Double-checking the CAN L and H wires is crucial because a mistake in identification could lead to improper integration of the system. It is recommended to mark the wires with small pieces of tape or label them with labels. Additionally, you can use a multimeter to verify that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves can employ a variety of tactics to evade the Ghost Immobiliser, which includes blocking and using spoofing signals. These methods work by amplifying signals sent from the key fob to the electronic controller unit. With advanced anti-jamming technologies and constant monitoring your vehicle, it can be protected from these sophisticated attacks.
Security Increased
Ghost immobilisers provide an additional layer of protection for your car against theft. It has a PIN security system that is entered via buttons on your steering wheel or dashboard making it difficult for thieves to take your car. The device is designed to be hidden within your vehicle. It has no lights, or other signals to alert burglars to its presence. It communicates directly with the ECU of your car through the data bus. This means that it is not vulnerable to hacking or relay attacks.
It is a great investment for those who have expensive automobiles that are at a higher chance of being stolen due to their worth and popularity. Its security features are enhanced to protect against key cloning, ECU swapping, and other threats to your car's security. Ghost immobilisers can be linked to an app, which means that you can easily arm and dearm them. They may also be equipped with a service/valet option that allows you to temporarily deactivate the immobiliser during repairs or maintenance.
Another advantage of ghost immobilisers is that it does not require wire cutting. This is a great option, particularly if your vehicle is newer and doesn't include an immobiliser. Certain systems also work with GPS tracking devices, adding an extra layer of security to your vehicle. A GPS tracker may also reduce your insurance rates. If you decide to purchase a ghost immobiliser, ensure that it's TASSA-certified and an experienced installer installs the device for you.
Compatibility with all major brands and models
The Ghost Immobiliser has been designed to work with all major makes and models of vehicles protecting your prized possessions from theft. It generates a unique pin number using buttons on your steering wheel, console, or door panels. You must enter this code before you can drive. It is tamper-proof and undetectable. It is also backed by three-year warranty. It is also fully accredited by insurance providers, which means that it could help reduce your premiums.
The Ghost system is different from normal immobilisers, which use the key fob for ignition control. It is connected directly to the engine controller through the CAN bus. This means that it is secure from tampering, is nearly impossible to remove or disable and cannot be targeted by organized car theft criminal gangs. Additionally to this, the Ghost system can be paired with a secure iPhone application that allows remote monitoring and management.
You can set a PIN code that is easy for you to remember but mathematically difficult for thieves to figure out. The PIN can be personalized and changed at any time, so you can keep your car secure even if you park it on the street or in a parking lot. You can also select a valet or service mode in case you need someone who is not driving your car temporarily for instance, when you're in the garage for servicing. This is a great way to prevent your car from being stolen by a shady mechanic. You can choose a Ghost Call alert to give you extra security. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser is a highly efficient security device, protecting your vehicle against typical methods of theft such as key cloning, key stealing and relay attacks. It connects to the vehicle's CAN data network and blocking communication with the engine ECU. This makes it very difficult for criminals to hack or copy your vehicle.
Once the system is installed, you'll be required to enter a PIN number up to 20 digits long using the buttons on your dashboard or steering wheel in order to start the engine. The system is completely concealed and undetectable to thieves, as it does not emit any radio frequency signals. It is also able to be set to an individual-changeable PIN code which further adds to its security. The system is also designed to stop cutting of circuits and makes it virtually impossible to tamper with.
Certain systems let you connect directly to the immobiliser through an app on your smartphone and disable it instantly when you forget your PIN. Some systems even have a valet/service setting that allows you to start your car, for instance, when you drop it off at a garage or valet park.
The Ghost Immobiliser is also inaccessible to thieves since it does not transmit radio signals. This is a significant advantage compared to other aftermarket security systems. It is also easy to use and does not require any complicated wiring. It can be used combination with dash cams to provide additional security. This dash cam is the Thinkware F70, which features clear and sharp 1080p HD dashcam footage, Format Free Technology and parking mode. The system is able to be hardwired to guarantee maximum performance and longevity.
Installation
If you want to protect your vehicle from theft, it's important to choose the correct immobiliser ghost. This device will prevent car thefts by preventing the communication between key fobs as well as the engine controller unit. This device stops thieves from stealing the signal to start your vehicle. It also can detect the moment it has been altered with and alert the owner of the vehicle.
The device is easy to install and can be used with the existing systems in your vehicle. It does not require any modifications to wiring in your vehicle and can be placed in a hidden place such as under the dashboard. To ensure that the device is correctly installed, follow the instructions in the user's manual. After installation, it's crucial to test the system. This will ensure the ghost of the immobiliser functions as intended.
You can buy an Autowatch Ghost 2 immobiliser and then have it installed by a reputable installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to take over the system or bypass it. The installation process usually takes between 2 and 3 hours.
It is recommended to consult the wiring diagram of your vehicle prior to the installation process. This will allow you to locate the CAN High and CAN Low wires required to connect the Ghost to your vehicle's engine. Double-check all connections to ensure that they are safe and well-insulated.
Once the installation is completed after which you can use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle in the event that it is not started with the correct PIN code which you can set yourself. The ghost cost of immobilisers can also be set to Service/Valet mode for times when you need to hand over your vehicle for servicing or valet parking.